Categorías del producto
- Air conditioner (40)
- Air conditioner Daikin (9)
- Air Conditioner Daikin Sensira (4)
- All (64)
- Boilers (16)
- GC1200W (2)
- GC1200W 20/24 (1)
- GC1200W 24/30 (1)
- Heater (5)
- Osmosis (1)
- Others (4)
- Thermal emitters (2)
- Thermostats (1)
- Top sales air conditioned (5)
- Top sales boilers (7)
Junkers Mono Split Mural Comfort-4 Air Conditioner
Junkers Splits Air Conditioning units offer various functions for the best use of the equipment and the consequent energy savings:
- Smart antifreeze protection, takes advantage of the operation of the unit in heat mode and improves it, thus achieving considerable savings.
- Automatic restart and anti-freeze protection, in a power failure the equipment is rearmed maintaining the same conditions that it had when it was turned off.
- Night function, controls the ambient temperature during the night.
Self cleaning function, allows the appliance to work for 3 minutes after it is turned off, preventing the formation of mold. - Swing function, this function allows to make a better air distribution by automatically moving the air outlet grille.
- Fault diagnosis function, indicates the error code on the display in the event of a possible fault.
- Turbo mode, with this function the ventilation goes to a higher speed to reach the desired temperature very quickly.
All Junkers equipment has 5 modes of operation depending on the use and comfort required, allowing the greatest comfort and efficiency of the equipment.
- Auto mode, the system switches between heat and cool modes automatically if the ambient temperature is above or below its set point. The unit will operate in cold mode if the ambient temperature is above its set point, and in heat mode if this temperature is below its set point.
- Cold mode, you can select the fan speed, to reach the desired temperature.
- Heat mode, you can select the fan speed, to reach the desired temperature.
- Fan mode, the fan speed can be selected without operating the outdoor unit.
- Dehumidification mode, if the ambient temperature is above the set point, the unit will work in cold mode with the fan on auto. If the ambient temperature is below its set point, the compressor and fan start and stop period will go into a fixed repeat cycle, depending on the difference between the ambient temperature and its set point.